Weather Shields for Chery Tiggo 4 Urban/Ultimate MY26 On

After selling out our first batch, Weather Shields V2.0 are here, with a sleeker, slimmer design while keeping the same functionality Tiggo owners loved.

Designed to let fresh air in while reducing wind, rain and glare, without needing to crack your windows wide open.

Reasons to love them: 

• New slimmer profile for improved visibility
• Helps reduce interior heat when parked
• Allows airflow in wet weather
• Reduces wind noise and side glare
• Tough, UV and impact-resistant acrylic
• Easy installation with pre-applied automotive-grade tape
• These weather shields are tinted, not transparent

What's included: 

• 2x front weather shields
• 2x rear weather shields
• Surface prep wipes + adhesion promoter to help achieve the best bond during install

Suits: Chery Tiggo 4 Urban / Ultimate MY26

Quick Install Guide (DIY Friendly)

1. Test fit the weather shields first to understand the correct position before sticking anything down.
2. Clean the window frame thoroughly using the included wet wipe, then dry it with the dry wipe.
3. Apply the included adhesion promoter to the surface where the tape will sit.
4. Peel back the tape from each end and line the shield up carefully.
5. Once you’re happy with the position, slowly remove the rest of the tape while pressing the shield firmly into place.
6. Apply steady pressure along the full length to make sure it’s properly secured.

Good to know:

• Avoid moving the shields or washing your car for 24 hours after installation.
• We’ve put together a step-by-step YouTube video to guide you through the DIY install.

👉 Watch video guide